18
Genie TS Series Overview
Genie_TS_Series GigE Vision Camera
Sensor Performance: TS-M1920, TS-C1920, TS-
M2048, TS-C2048
The sensor description below (CMOSIS models) provides a specification table and response
graphics. The graph describes the sensor response to different wavelengths of light (excluding lens
and light source characteristics).
Sensor Specifications
Item / Feature
Specification
Camera Models & Sensor Used
TS-M2048, TS-C2048, (CMOSIS — CMV4000)
TS-M1920, TS-C1920, (CMOSIS — CMV2000)
Minimum Frame Rate (internal acquisition)
0.06 fps (one frame every 16.6 seconds)
Maximum Full Frame Rate
(internal acquisition)
(written to internal memory)
with Standard & JPEG Design: 71 fps (TS-M1920), 37 fps (TS-M2048)
with FAST Design: 142 fps (TS-M1920), 75 fps (TS-M2048)
Maximum Frame Rate Output
System dependent on the GigE network
Internal Exposure Control
* using timed exposure modes
14
μ
s for Standard, JPEG Firmware, — all models
7
μ
s for Fast Design Firmware, — all supported models
Maximum 16 sec. for all models and firmware.
Internal Trigger to Start of Exposure
0
μ
s
External Exposure Control
External pulse width plus 13
μ
s with Standard or JPEG Design Firmware
External pulse width plus 6
μ
s with Fast Design Firmware
End of Exposure to Start of Readout
Standard Design: 44
μ
s (for TS-M1920, TS-M2048)
FAST Design: 23
μ
s (for TS-M1920, TS-M2048)
Horizontal Line Time
Standard Design: 12.9
μ
s
FAST Design: 6.5
μ
s
Readout Time
Horizontal Line Time (max) x (lines in frame) —
in
μ
s
Pixel Size
5.5 µm x 5.5 µm
Pixel Format
User selectable 8-bit or 10-bit
Shutter
Full frame electronic shutter
Sensor Analog Gain
Default Gain value = 1.2, User selectable 1.2x, 1.4x, or 1.6x
Full Well charge
11.25 ke typical with the default gain value of 1.2
Output Dynamic Range † ‡
57.1 db (nominal gain, 8-bit buffer)
59.7 db (nominal gain, 10-bit buffer)
Signal to Noise ratio †† ‡
38.8 db (nominal gain, 8-bit buffer)
38.9 db (nominal gain, 10-bit buffer)
DN Variation
50% saturation: t/-3.5%
