80
Operational Reference
Genie_TS_Series GigE Vision Camera
Advanced Processing Control Category
The Genie TS Advanced Processing controls, as shown by CamExpert, groups parameters used to
configure Defective Pixel Detection, and Flat Field calibration. LUT mode controls are currently
supported by monochrome cameras, with color camera support available with a later device
version. Parameters in gray are read only, either always or due to another parameter being
disabled. Parameters in black are user set in CamExpert or programmable via an imaging
application.
Features listed in the description table but tagged as
Invisible
are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications. Also important, Genie
TS cameras are available in a number of models implementing different sensors and image
resolutions which may not support the full feature set defined in this category.
