Genie_TS_Series GigE Vision Camera
Operational Reference
137
Number Of Interfaces
GevNumberOfInterfaces
Indicates the number of physical network
interfaces supported by this device. (RO)
1.00
Invisible
Message Channel Count
GevMessageChannelCount
Indicates the number of message
channels supported by this device. (RO)
1.00
Invisible
Stream Channel Count
GevStreamChannelCount
Indicates the number of stream channels
supported by this device (0 to 512). (RO)
1.00
Invisible
Gev Supported Option
Selector
GevSupportedOptionSelector
Selects the GEV option to interrogate for
existing support. (RO)
IPConfigurationLLA
IPConfigurationDHCP
IPConfigurationPersistentIP
StreamChannelSourceSocket
MessageChannelSourceSocket
CommandsConcatenation
WriteMem
PacketResend
Event
EventData
PendingAck
Action
PrimaryApplicationSwitchover
ExtendedStatusCodes
DiscoveryAckDelay
DiscoveryAckDelayWritable
TestData
ManifestTable
CCPApplicationSocket
LinkSpeed
HeartbeatDisable
SerialNumber
UserDefinedName
StreamChannel0BigAndLittleEndian
StreamChannel0IPReassembly
StreamChannel0UnconditionalStreaming
StreamChannel0ExtendedChunkData
1.00
Invisible
Gev Supported Option
GevSupportedOption
Returns TRUE if the selected GEV option is
supported. (RO)
1.00
Invisible
LLA Supported
GevSupportedIPConfigurationLLA
Indicates if LLA (Auto-IP) is supported by
the selected interface. The LLA method
automatically assigns the Genie with a
randomly chosen address on the
169.254.xxx.xxx subnet. After an address
is chosen, the link-local process sends an
ARP query with that IP onto the network
to see if it is already in use. If there is no
response, the IP is assigned to the device,
otherwise another IP is selected, and the
ARP is repeated. Note that LLA is unable
to forward packets across routers. LLA is
the recommended scheme when only one
NIC is connected to GigE cameras; ensure
only one NIC is using LLA on your PC,
otherwise IP conflicts will result. (RO)
1.00
Invisible
DHCP Supported
GevSupportedIPConfigurationDHCP
Indicates if DHCP is supported by the
selected interface. This IP configuration
mode requires a DHCP server to allocate
an IP address dynamically over the range
of some defined subnet. The Genie must
be configured to have DHCP enabled. This
is the factory default settings. The DHCP
server is part of a managed network.
Windows itself does not provide a DHCP
server function therefore a dedicated
DHCP server is required. The DALSA
Network Configuration Tool can be
configured as a DHCP server on the NIC
used for the GigE Vision network. (RO)
1.00
Invisible
