Teledyne TS-C2500, User Manual

Page: 87 / 191

Genie_TS_Series GigE Vision Camera Operational Reference

85
3300 K CCT_3300K
3500 K CCT_3500K
4875 K CCT_4875K
5650 K CCT_5650K
5800 K CCT_5800K
7000 K CCT_7000K
Color Correction Spectrum Range colorCorrectionSpectrumRange Select the Color Correction Spectrum Range used.
The user is responsible for installing an external IR
filter when required.
< Beginner, DFNC >
V1.20 V1.20 —
Visible Light 380 to 650nm VisibleLight380to650nm Images taken with a low pass IR filter passing light
below 650 nm.
Visible And Near Infrared Light VisibleAndNearInfraredLight Images taken without an IR filter.
Color Saturation Control colorEnhancementControl User set gain on the color saturation component,
ranging from 0 to 4x.
< Beginner, DFNC >
V1.20 V1.20
Sharpness Mode sharpnessMode Sets the enable state of the sharpness feature
available with monochrome cameras. Requires an
acquisition of 4 lines minimum.
< Expert, DFNC >
STD STD —
Off Off Disables Image Sharpness feature.
Active Active Enables Image Sharpness feature.
Sharpness Type sharpnessType Selects the type of image filter to apply.
< Expert, DFNC >
STD STD —
Smoothing More EnhanceMore Smoothing More image filter
Smoothing Less EnhanceLess Smoothing Less image filter
Sharpen Less SharpenLess Sharpen Less image filter
Sharpen More SharpenMore Sharpen More image filter
LUT Mode lutMode Sets the enable state of the selected LUT (Lookup
Table).
< Expert, DFNC >
all
STD
JPEG
—
Off Off Disables the LUT.
Active Active Enables the selected LUT.
LUT Type lutType Displays the LUT type of the currently selected
Lookup Table.
< Expert, DFNC >
V1.20 V1.20
User Defined UserDefined Uses the user programmable LUT.
Gamma Correction GammaCorrection Uses gamma LUT
Gamma Correction gammaCorrection Sets the gamma correction factor (i.e. inverse
gamma). The gamma correction is applied as an
exponent to the original pixel value.
< Expert, DFNC >
V1.20 V1.20 —