146
Operational Reference
Genie_TS_Series GigE Vision Camera
File Access Control Category
The File Access control in CamExpert allows the user to quickly upload various data files to the
connected Genie TS. The supported data files are for Genie TS firmware updates, Flat Field
coefficients, LUT data tables, and a custom image for use as an internal test pattern. Note that a
Genie TS Framework installation includes a
corresponding to the framework.
Features listed in the description table but tagged as
Invisible
are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications. Also important, Genie
TS cameras are available in a number of models implementing different sensors and image
resolutions which may not support the full feature set defined in this category.
File Access Control Feature Descriptions
The Device Version number represents the camera software functional group, not a firmware
revision number. As Genie TS capabilities evolve the device version tag will increase, therefore
identifying the supported function package. New features for a major device version release will be
indicated by
green text
for easy identification.
Display Name
Feature & Values
Description
Device
Version &
View
File Selector
FileSelector
Selects the file to access. The file types which are
accessible are device-dependent.
Firmware
Firmware1 Upload new firmware to the camera which will execute on
the next camera reboot cycle. Select the DeviceReset
feature after the upload completes.
Factory FlatField coefficients
FlatFieldCoefficients0 Select factory flatfield coefficients1. These are the factory
values when the camera sensor Gain is 1.0.
Factory FlatField coefficients 2
FlatFieldCoefficients00 Select factory flatfield coefficients2. These are the factory
values used when the camera sensor Gain is 2.65.
User FlatField coefficients 1
FlatFieldCoefficients1 Select to read (download), write (upload) or delete the
User flatfield coefficients 1.
User FlatField coefficients 2
FlatFieldCoefficients2 Select to read (download), write (upload) or delete the
User flatfield coefficients 2.
User FlatField coefficients
n
FlatFieldCoefficients
n
Maximum number of FFC Coefficients is model dependent.
User Defined Test Image 1
UserDefinedImage1 Select to write (upload) a User Defined Test Image into
the camera's internal image buffer. This camera image
buffer is cleared on power-off or when the camera is
Reset. Color test images must be a in a color format
supported by the camera.
User Defined Test Image 2
UserDefinedImage2 User Defined Image 2:
User Defined Test Image
n
UserDefinedImage
n
Maximum number of User Defined Test Image available is
model dependent.
1.00
Guru