Teledyne TS-C2500, User Manual

Page: 132 / 191

130

Operational Reference Genie_TS_Series GigE Vision Camera
Falling Edge FallingEdge Reset the timestamp counter on the falling edge of
the source signal.
Any Edge AnyEdge Reset the timestamp counter on the falling or rising
edge of the source signal.
Timestamp Reset Cmd timestampControlReset Resets the timestamp counter to 0. (WO)
1.00
Expert
DFNC
Event Selector EventSelector Select the Event to enable/disable with the
EventNotification feature.
Start of Acquisition AcquisitionStart Event sent on control channel on acquisition start.
End of Acquisition AcquisitionEnd Event sent on control channel on acquisition end.
Start of Frame FrameStart Event sent on control channel on an Active Frame.
This occurs with the start of the exposure delay.
Start of Exposure ExposureStart Event sent on control channel on start of exposure.
End of Exposure ExposureEnd Event sent on control channel on end of exposure.
Start of Readout ReadoutStart Event sent on control channel on start of sensor
readout.
End of Readout ReadoutEnd Event sent on control channel on end of sensor
readout.
Acquisition Start Next
Valid
AcquisitionStartNextValid Event sent on control channel when the
AcquisitionStart command can be used again.
Valid Frame Trigger ValidFrameTrigger Event sent on control channel when a valid frame
trigger is generated.
Invalid Frame Trigger InvalidFrameTrigger Event sent on control channel when a frame trigger
occurs in an invalid Trigger region. Therefore the
trigger is rejected and no frame acquisition occurs.
Image Lost ImageLost Event sent on control channel when an image is lost
due to insufficient onboard memory.
Events Overflow eventsOverflow Event sent on control channel when all previous
active events have been disabled because the
camera cannot send them fast enough, generating in
internal message overflow. Required events must be
re-enabled manually.
1.00
Expert
Event Notification EventNotification Enable Events for the event type selected by the
EventSelector feature.
Off Off The selected event is disabled.
GigEVisionEvent GigEVisionEvent The selected event will generate a software event.
1.00
Expert
Event Statistic Selector eventStatisticSelector Selects which Event statistic to display.
Image Lost ImageLost Image is acquired but lost before it’s been
transferred.
1.10
Expert
DFNC
Event Statistic eventStatisticCount Display the count of the selected Event.
1.10
Expert
DFNC
Event Statistic Count
Reset
eventStatisticCountReset Reset the count of the selected Event.
1.10
Expert
DFNC
Acquisition Start Event ID EventAcquisitionStart Represents the event ID to identify the
EventAcquisitionStart software event.
1.00
Guru
Acquisition Start Event
Timestamp EventAcquisitionStartTimestam
p Timestamp of the EventAcquisitionStart event. (RO)
1.00
Guru
Acquisition End Event ID EventAcquisitionEnd Represents the event ID to identify the
EventAcquisitionEnd software Event. (RO)
1.00
Guru
Acquisition End Event
Timestamp EventAcquisitionEndTimestamp Timestamp of the EventAcquisitionEnd event. (RO)
1.00
Guru
Frame Start Event ID EventFrameStart Represents the event ID to identify the
EventFrameStart software Event. (RO)
1.00
Guru
Frame Start Event
Timestamp EventFrameStartTimestamp Timestamp of the EventFrameStart event. (RO)
1.00
Guru
Exposure Start Event ID EventExposureStart Represents the event ID to identify the
EventExposureStart software Event. (RO)
1.00
Guru