Teledyne TS-C2500, User Manual

Page: 45 / 191

Genie_TS_Series GigE Vision Camera Operational Reference

43
Display Name Feature & Values Description Device Version
& View
Manufacturer Name DeviceVendorName Displays the device vendor name. (RO) 1.00
Beginner
Model Name DeviceModelName Displays the device model name. (RO) 1.00
Beginner
Device Version DeviceVersion Displays the device version. This tag will also
highlight if the firmware is a beta or custom design.
(RO) 1.00
Beginner
Manufacturer Info DeviceManufacturerInfo This feature provides extended manufacturer
information about the device. Genie TS cameras show
which firmware design is currently loaded. (RO) 1.00
Beginner
Firmware Version DeviceFirmwareVersion Displays the currently loaded firmware version
number. Firmware files have a unique number and
have the .cbf file extension. (RO) 1.00
Beginner
Serial Number DeviceID Displays the device’s factory set camera serial
number. (RO) 1.00
Beginner
MAC Address deviceMacAddress Displays the unique MAC (Media Access Control)
address of the Device. (RO) 1.00
DFNC
Beginner
Device User ID DeviceUserID Feature to store a user-programmable identifier of up
to 15 characters. The default factory setting is the
camera serial number. (RW) 1.00
Beginner
Device Temperature
Selector DeviceTemperatureSelector Select the source where the temperature is read.
FPGA Board FPGABoard Read FPGA Board temperature
Sensor Board SensorBoard Read Sensor Board temperature
1.11
Beginner
Device Temperature DeviceTemperature The temperature of the selected source in degrees
Celsius
1.11
Beginner
Power-up Configuration
Selector
UserSetDefaultSelector Selects the camera configuration set to load and
make active on camera power-up or reset. The
camera configuration sets are stored in camera
non-volatile memory. (RW)
Factory Setting Default Load factory default feature settings.
UserSet1 UserSet1 Select the user defined configuration UserSet 1 as the
Power-up Configuration.
UserSet2 UserSet2 Select the user defined configuration UserSet 2 as the
Power-up Configuration.
1.00
Beginner
User Set Selector UserSetSelector Selects the camera configuration set to load feature
settings from or save current feature settings to. The
Factory set contains default camera feature settings.
(RW)
Factory Setting Default Select the default camera feature settings saved by
the factory.
UserSet 1 UserSet1 Select the User Defined Configuration space UserSet1
to save to or load from features settings previously
saved by the user.
UserSet 2 UserSet2 Select the User Defined Configuration space UserSet1
to save to or load from features settings previously
saved by the user.
1.00
Beginner
Load Configuration UserSetLoad Loads the camera configuration set specified by the
User Set Selector feature, to the camera and makes it
active. Can not be updated during a Sapera transfer.
(W)
1.00
Beginner
Save Configuration UserSetSave Saves the current camera configuration to the user
set specified by the User Set Selector feature. The
user sets are located on the camera in non-volatile
memory. (W)
1.00
Beginner