14
Genie TS Series Overview
Genie_TS_Series GigE Vision Camera
Sensor Performance: TS-M4096, TS-C4096, TS-
M3500, TS-C3500, TS-M2500, TS-C2500
The sensor description below (DALSA Vouvray models) provides a specification table and response
graphics. The graph describes the sensor response to different wavelengths of light (excluding lens
and light source characteristics). Visible light spans wavelengths between about 390 - 780
nanometers.
Sensor Specifications
Item / Feature
Specification
Camera Models
TS-M4096, TS-M3500, TS-M2500, TS-C4096, TS-C3500, TS-C2500
Sensor Used
Teledyne DALSA Vouvray
Minimum Frame Rate (internal acquisition)
0.1 fps (one frame every 10 seconds)
Maximum Frame Rate (internal acquisition)
Dependent on Genie TS model (written to internal memory)
For STD and JPEG Designs: 12fps (4096), 19fps (3500), 29fps (2500)
Maximum Frame Rate Output
System dependent on the GigE network
Internal Exposure Control
19
μ
s to 16 sec. for timed exposure modes
External Exposure Control
External pulse width plus 19
μ
s (for TriggerWidth exposure mode)
Internal Trigger to Start of Exposure
106
μ
s minimum
End of Exposure to Readout
20
μ
s
Horizontal Line Time
26.125
μ
s (TS-M4096), 22.925
μ
s (TS-M3500), 16.525
μ
s (TS-M2500)
26.125
μ
s (TS-C4096), 22.925
μ
s (TS-C3500), 16.525
μ
s (TS-C2500)
Readout Time
Horizontal Line Time (max) x (lines in frame +1)
in
μ
s
Pixel Size
6.0µm x 6.0µm
Pixel Format
User selectable 8-bit or 10-bit
Shutter
Full frame electronic shutter
Sensor Gain Range
Default Gain value = 1.0, User selectable 0.7x (multi-slope only), 1.0x,
2.65x (will vary dependant on Black Level Offset setting)
Full Well
Capacity
32ke
(typical)
Output Dynamic Range † ‡
54.1 db (nominal gain, 8-bit buffer)
55.8 db (nominal gain, 10-bit buffer)
Signal to Noise ratio †† ‡
43.8 db (nominal gain, 8-bit buffer)
44.1 db (nominal gain, 10-bit buffer)
DN Variation
50% saturation: t/-4%
Responsivity
16 DN/(nJ/cm2) @ 560 nm (typical)
† Dynamic Range Test Conditions
Analog Gain 1x
Exposure 100µs
All Corrections OFF
†† SNR Test Conditions
Analog Gain 1x
Exposure 1200µs
Factory FFC Active and Defective Pixel Detection Active with threshold at 15%
