Subaru B9 TRIBECA WX 2007, Manual

Page: 268 / 861

CC-5
Cruise Control Command Switch
CRUISE CONTROL SYSTEM
3. Cruise Control Command
Switch
A: REMOVAL
CAUTION:
Before servicing, be sure to read the notes in
the “AB” section for proper handling of the
driver’s airbag module. <Ref. to AB-4, CAU-
TION, General Description.>
1) Set the front wheels in straight ahead position.
2) Turn the ignition switch to OFF.
3) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
4) Using TORX
®
BIT T30 (1), loosen two TORX
®
bolts which secure the driver’s airbag module.
5) Disconnect the airbag module connector on
back of the airbag module.
6) Remove the steering wheel. <Ref. to PS-14, RE-
MOVAL, Steering Wheel.>
7) Remove the four screws to remove the lower
cover from steering wheel.
8) Remove one screw to remove the cruise control
command switch from lower cover.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the cruise control command switch resis-
tance.
If NG, replace the cruise control command switch.
CC-00018
(1)
CC-00181
CC-00182
Switch Area Terminal No. Standard
CANCEL
SET/COAST
RESUME/
ACCEL
All OFF 2 and 3 Approx. 4 k
Ω
CANCEL ON 2 and 3 Less than 1 Ω
SET/COAST ON 2 and 3 Approx. 250
Ω
RESUME/
ACCEL
ON 2 and 3 Approx. 1500
Ω
MAIN
OFF 1 and 2 1 M
Ω
or more
ON 1 and 2 Less than 1
Ω
CC-00252
2 3 1
asieps_tobira.book 5 ページ ２０１２年２月１０日 金曜日 午後３時２６分