PI-10
Pre-delivery Inspection
PRE-DELIVERY INSPECTION
29.ACCESSORY POWER SOCKET
1) Check the operation of the rear accessory power
socket.
2) Check operation of the accessory power socket
in console box.
30.NAVIGATION SYSTEM
1) Check all display functions for normal operation.
2) Check the map disc (DVD) are provided on vehi-
cle.
3) Check that the navigation system operates nor-
mally.
4) Check that the rear view camera operates nor-
mally.
31.REAR ENTERTAINMENT SYSTEM
Check that the rear entertainment system operates
normally.
32.LIGHTING SYSTEM
1) Check the headlight operations.
2) Check the stop light operation.
3) Check other lights for normal operations.
33.WIPER DEICER
Check that the wiper deicer operates normally.
34.ILLUMINATION CONTROL
Check that the illumination control operates nor-
mally.
35.WINDOW WASHER
Check that the window washer system injects
washer fluid to the specified area of the windshield
shown in the figure.
Front injection position:
A: 250 mm (9.84 in)
B: 433 mm (17.0 in)
Rear injection position:
A: 72 mm (2.83 in)
B: 70°
36.WIPER
Check the front and rear wipers for normal opera-
tions.
37.POWER WINDOW OPERATION CHECK
Operate the power window switches one by one to
check that each of the power windows goes up and
down without noises.
3
8
.SUNROOF
Check that the sunroof operates normally.
39.DOOR MIRROR
Check that the remote control mirror operates nor-
mally.
40.BRAKE TEST
Check the foot brake for normal operations.
41.PARKING BRAKE
Check the parking brake for normal operations.
When applying the parking brake pedal with force
of 300 N (30.6 kgf, 67.5 lbf), check that the parking
brake pedal is at 5 to 6 notches.
42.AT SHIFT CONTROL
1) Turn the ignition switch to ON.
2) While brake pedal is not depressed, check if the
select lever does not move from “P” range.
3) While brake pedal is depressed, check if the se-
lect lever moves from “P” range.
4) Set the select lever to other than “P” range.
5) When the ignition switch is turned OFF, check if
the key can be removed from the ignition switch.
(1) Nozzle
(2) Spray center aiming position
(3) Spray area (shaded area)
(2)
B
A
A
(3)
(1)
(1)
(2)
WW-00365
(1) Nozzle
(2) Upper edge of the rear gate glass
A
B
(2)
(1)
WW-00368
asieps_tobira.book 10 ページ 2012年2月10日 金曜日 午後3時26分
Summary of Contents for B9 TRIBECA WX 2007
