Subaru B9 TRIBECA WX 2007, Manual

Page: 815 / 861

SL-39
Rear Door Latch and Door Lock Actuator Assembly
SECURITY AND LOCKS
11.Rear Door Latch and Door
Lock Actuator Assembly
A: REMOVAL
1) Raise the door glass to the top position.
2) Disconnect the ground cable from the battery.
3) Remove the rear door trim. <Ref. to EI-35, RE-
MOVAL, Door Trim.>
4) Remove the cable from rear inner remote. <Ref.
to SL-37, REMOVAL, Rear Inner Remote.>
5) Remove the sealing cover. <Ref. to EB-21, RE-
MOVAL, Rear Sealing Cover.>
6) Remove the rear sash. <Ref. to GW-17, RE-
MOVAL, Rear Regulator and Motor Assembly.>
7) Pull out the cable from the cable clamp of the
outer handle.
8) Remove the three screws and one bolt.
9) Disconnect the connectors, and then remove the
rear door latch and door lock actuator assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure lock and unlock works correctly after in-
stallation.
C: INSPECTION
1) Check the cable for deformation. When it is de-
formed, straighten it because failure operations
may occur. When it is unrepairable, replace the
rear door latch and door lock actuator assembly.
2) Check that the lever and cable operates smooth-
ly.
SL-00443
asieps_tobira.book 39 ページ ２０１２年２月１０日 金曜日 午後３時２６分