Subaru B9 TRIBECA WX 2007, Manual

Page: 352 / 861

EB-23
Rear Gate
EXTERIOR BODY PANELS
14) Remove the rear gate hinge bolt, and remove
the rear gate panel.
15) Remove the rear gate hinge from the vehicle.
2. REAR GATE DAMPER STAY
CAUTION:
• Do not damage piston rods and oil seals.
• Never disassemble cylinders: They contain
gas.
1) Before removing the rear gate damper stay, pre-
vent the rear gate from closing using prop or the
like.
CAUTION:
If the prop comes off, operators may get injured
and vehicle may get damaged. Make sure to
support the rear gate with secure material to
prevent injury or damage.
2) Remove the mounting bolt of rear gate damper
stay.
3) Remove the mounting bolts, and remove the
damper stay.
EB-00023
EB-00281
EB-00282
EB-00283
asieps_tobira.book 23 ページ ２０１２年２月１０日 金曜日 午後３時２６分