Subaru B9 TRIBECA WX 2007, Manual

Page: 68 / 861

AB-17
Side Airbag Module
AIRBAG SYSTEM
C: INSPECTION
CAUTION:
Refer to “CAUTION” of “General Description”
before handling the airbag module. <Ref. to AB-
4, CAUTION, General Description.>
Check for the following, and replace the damaged
parts with new parts. <Ref. to AB-12, SIDE AIR-
BAG MODULE, INSPECTION, Inspection Loca-
tions After a Collision.>
1) With side collision (when side airbag is de-
ployed)
• Side airbag module assembly
• Backrest pad assembly
• Backrest frame assembly
• Backrest cover assembly
2) When damage is found by visual check
• Headrest assembly
• Bushing
• Slide rail OUT (Driver’s side)
• Slide rail IN (Driver’s side)
• Seat cushion frame assembly (Passenger’s
side)
• Seat hinge cover
• Seat lifter lever
• Reclining lever
• Side airbag harness and connector on body side
3) With side collision (when side airbag is not de-
ployed)
Check the seat and airbag module visually, and
then replace them with new parts if damaged or
cracked.
Specially inspect the damage of airbag module
body, mounting bracket and harness connector.
4) Without side collision (dirt and damage of cover)
Replace the corresponding part with a new part.
asieps_tobira.book 17 ページ ２０１２年２月１０日 金曜日 午後３時２６分