Subaru B9 TRIBECA WX 2007, Manual

Page: 416 / 861

GW-9
Front Door Glass
GLASS/WINDOWS/MIRRORS
4. Front Door Glass
A: REMOVAL
1) Remove the front door trim. <Ref. to EI-35, RE-
MOVAL, Door Trim.>
2) Remove the sealing cover. <Ref. to EB-18, RE-
MOVAL, Front Sealing Cover.>
3) Operate the power window switch to move the
glass to the position shown in the figure, and then
remove the two bolts through service holes.
4) Tilt the door glass forward, then remove the door
glass from the glass run rubber.
5) Remove the door glass.
CAUTION:
• Since the gear may be disengaged, do not
turn regulator in the closing direction after re-
moving glass.
• Avoid impact and damage to the glass.
6) Remove the bolt (A), and then remove the door
sash (B).
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Make sure that the glass run rubber is placed
securely in door frame and sash.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to GW-3, FRONT DOOR GLASS,
COMPONENT, General Description.>
GW-00479
GW-00480
GW-00565
(B)
(A)
asieps_tobira.book 9 ページ ２０１２年２月１０日 金曜日 午後３時２６分