Subaru B9 TRIBECA WX 2007, Manual

Page: 72 / 861

AB-21
Curtain Airbag Sensor
AIRBAG SYSTEM
10.Curtain Airbag Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the rear quarter lower trim. <Ref. to EI-
45, REMOVAL, Rear Quarter Trim.>
4) Remove the nut and disconnect the airbag con-
nector to remove the curtain airbag sensor.
B: INSTALLATION
CAUTION:
• Do not reuse the bolt and nut.
• Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque:
8 N·m (0.82 kgf-m, 5.9 ft-lb)
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
• Mounting bracket or connector of curtain airbag
sensor is damaged.
• Curtain airbag is deployed.
AB-00727
asieps_tobira.book 21 ページ ２０１２年２月１０日 金曜日 午後３時２６分