Subaru B9 TRIBECA WX 2007, Manual

Page: 857 / 861

WW-17
Front Washer Nozzle
WIPER AND WASHER SYSTEMS
9. Front Washer Nozzle
A: REMOVAL
1) Remove the front hood insulator. <Ref. to EB-
13, FRONT HOOD INSULATOR, REMOVAL,
Front Hood.>
2) Hold the claw (A) of the washer nozzle towards
the direction of the arrow, and remove the washer
nozzle.
3) Remove the washer hose from the washer noz-
zle.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
• Make sure the nozzle and hose are not clogged.
• Make sure the hose is not bent.
• While the vehicle is at a standstill and the wiper
switch is turned OFF, make sure that the washer in-
jection position is as shown in the figure.
Spray position:
A: 250 mm (9.84 in)
B: 433 mm (17.05 in)
(1) Nozzle
(2) Spray center aiming position
(3) Spray area (shaded area)
(A)
WW-00429
(2)
B
A A
(3)
(1) (1)
(2)
WW-00365
asieps_tobira.book 17 ページ ２０１２年２月１０日 金曜日 午後３時２６分