Subaru B9 TRIBECA WX 2007, Manual

Page: 741 / 861

SB-13
Second Seat belt
SEAT BELT SYSTEM
4. SHOULDER SEAT BELT CENTER
BUCKLE
1) Remove the LH second-row seat assembly.
<Ref. to SE-13, LH&CTR SEAT, REMOVAL, Sec-
ond-Row Seats.>
2) Remove the RH hinge outer cover.
3) Remove the bolt, and then remove the shoulder
seat belt center buckle.
5. INNER SEAT BELT LH ASSEMBLY
1) Remove the LH second-row seat assembly.
<Ref. to SE-13, LH&CTR SEAT, REMOVAL, Sec-
ond-Row Seats.>
2) Remove the bolt from the back of the seat cush-
ion, and then detach the inner belt assembly.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing, be careful of the routing of the
seatbelt, and make sure that the belt is not
twisted.
C: INSPECTION
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or worn. Seat belt is
abnormally wound or extended.
• Inner belt is deformed or damaged.
• Seat belt buckle cannot be engaged properly.
SB-00311
SB-00312
asieps_tobira.book 13 ページ ２０１２年２月１０日 金曜日 午後３時２６分