Subaru B9 TRIBECA WX 2007, Manual

Page: 827 / 861

SL-51
Body Integrated Unit
SECURITY AND LOCKS
23.Body Integrated Unit
A: REMOVAL
NOTE:
• When replacing the body integrated unit, check
the current setting and note it. <Ref. to LAN(diag)-
18, CONFIRMATION OF CURRENT SETTING,
OPERATION, Subaru Select Monitor.>
• When replacing the body integrated unit, all im-
mobilizer keys also must be replaced and regis-
tered again.
1) Disconnect the ground cable from the battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-36, REMOVAL, Instrument Panel Lower Cov-
er.>
3) Disconnect the connector of body integrated
unit.
CAUTION:
• Be careful to keep water and other foreign
materials away from body integrated unit.
• Do not install or register an immobilizer relat-
ed module of other registered vehicles in order
to diagnose failures or inspect functions.
4) Remove two mounting nuts for body integrated
unit bracket, and remove the bracket.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• When the same body integrated unit is rein-
stalled in the same vehicle, it is not necessary to
register the immobilizer again.
• Make sure that there are no differences from the
contents of the current settings after installation.
<Ref. to LAN(diag)-18, CONFIRMATION OF CUR-
RENT SETTING, OPERATION, Subaru Select
Monitor.>
SL-00457
asieps_tobira.book 51 ページ ２０１２年２月１０日 金曜日 午後３時２６分