Subaru B9 TRIBECA WX 2007, Manual

Page: 664 / 861

LI-2
General Description
LIGHTING SYSTEM
1. General Description
A: SPECIFICATION
B: CAUTION
• Before removing or installing parts, always disconnect the battery ground cable from battery. When replac-
ing the audio, control module and other parts provided with memory functions, record the memory contents
before disconnecting the battery ground cable. Otherwise, the memory is cleared.
• Reassemble the parts in the reverse order of disassembly procedure unless otherwise indicated.
• Adjust parts to the given specifications.
• Connect the connectors securely during reassembly.
• After reassembly, make sure functional parts operate smoothly.
WARNING:
• The airbag system wiring harness is routed near electrical parts and switches. The airbag sys-
tem wiring harnesses and connectors are colored yellow. Do not use the electrical test equipment
on these circuits.
• Be careful not to damage the airbag system wiring harness when servicing electrical parts and
switches.
C: PREPARATION TOOL
1. GENERAL TOOL
Headlight
Halogen type low beam 12 V — 55 W
Halogen type high beam 12 V — 65 W
Front turn signal, parking 12 V — 28/8 W
Front side marker light 12 V — 5 W
Front fog light 12 V — 55 W
Side turn signal light 12 V — 2.7 W (LED)
Rear combination light
Stop/Tail light/Rear side
marker light
12 V — 21/5 W
Turn signal light 12 V — 21 W
Rear finisher light 12 V — 3.8 W
Back-up light 12 V — 16 W
License plate light 12 V — 5 W
High-mounted stop light 12 V — 1.3 W (LED)
Room light
12 V — 8 W (model without rear entertainment system)
12 V — 5 W (model with rear entertainment system)
Spot map light 12 V — 8 W
Luggage room light 12 V — 13 W
Rear gate light 12 V — 5 W
Glove box light 12 V — 1.4 W
Door step light 12 V — 3.5 W
TOOL NAME REMARKS
Circuit tester Used for measuring resistance and voltage.
asieps_tobira.book 2 ページ ２０１２年２月１０日 金曜日 午後３時２６分