Subaru B9 TRIBECA WX 2007, Manual

Page: 23 / 861

NT-10
Note
NOTE
15.ON THE CAR WHEEL BALANCING
CAUTION:
• Carry out this procedures after measuring
the balance of each single tire.
• Set the vehicle so that the front and rear
wheels are the same height.
• Release the parking brake during measure-
ment.
• Rotate each wheel by hands, and make sure it
rotates without dragging.
• Do not suddenly accelerate or decelerate
while working.
• When an error is indicated during engine
drive, do not use the motor drive together.
1) Set the rigid rack to the specified locations of
side sill, jack up the front or rear two wheels of non-
measuring side and set the pickup stands to two
wheels of measuring side.
2) For drive wheel, drive the tires with engine for
measurement.
3) For non-drive wheel, drive the tires from the on
the car wheel balancer for measurement.
(A) Balancer body
(B) Pickup stand
(A)
(B)
NT-00031
asieps_tobira.book 10 ページ ２０１２年２月１０日 金曜日 午後３時２６分