Subaru B9 TRIBECA WX 2007, Manual

Page: 435 / 861

GW-2 8
Rear Quarter Glass
GLASS/WINDOWS/MIRRORS
1 8 .Rear Quarter Glass
A: REMOVAL
Remove the glass in the same procedure as for
windshield glass. <Ref. to GW-18, REMOVAL,
Windshield Glass.>
B: INSTALLATION
1) Install the dam rubber.
2) Cut out the nozzle head and apply adhesive to
the glass end surface as shown.
3) Install the glass in the same procedure as for
windshield glass. <Ref. to GW-19, INSTALLA-
TION, Windshield Glass.>
4) After completion of all work, allow the vehicle to
stand for about 24 hours.
NOTE:
• When door is opened/closed after glass is bond-
ed, always lower the door glass first, and then
open/close it carefully.
• Move the vehicle slowly.
• For minimum drying time and vehicle standing time
before driving after bonding, follow instructions or in-
struction manual from the adhesive manufacturer.
5) After curing of adhesive, pour the water on exter-
nal surface of vehicle to check that there are no wa-
ter leaks.
NOTE:
When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
(1) Locating pin
(2) Dam rubber
(3) Fastener
(4) Adhesive
(5) Encap molding
GW-00500
(4)
(2)
(5)
(2)
(1)
(1)
(3)
C
B
B B
C
A
A
(1) Dam rubber
(2) Adhesive
(3) Encap molding
(4) 8 mm (0.31 in)
(5) 9 mm (0.35 in)
(6) 2 mm (0.07 in)
(7) 4 mm (0.15 in)
(8) 11 mm (0.43 in)
(9) 10 mm (0.39 in)
GW-00501
(3)
(4)
(7)
(5)
(6)
(4)
(5)
(6)
(7)
(2)
(1)
(3)
(2)
(8)
(4)
(6)
(5)
(3)
(2)
A-A
C-C B-B
(9)
(4)
(6)
(5)
60
asieps_tobira.book 28 ページ ２０１２年２月１０日 金曜日 午後３時２６分