Subaru B9 TRIBECA WX 2007, Manual

Page: 428 / 861

GW-21
Windshield Glass
GLASS/WINDOWS/MIRRORS
11) Fit the locating pins, and install windshield
glass using suction rubber cup.
12) Lightly press the windshield glass for tight fit.
13) Make flush the adhesive surface jutted out us-
ing spatula.
14) After completion of all work, allow the vehicle to
stand for about 24 hours.
NOTE:
• When door is opened/closed after glass is bond-
ed, always lower the door glass first, and then
open/close it carefully.
• Move the vehicle slowly.
• For minimum drying time and vehicle standing
time before driving after bonding, follow instruc-
tions or instruction manual from the adhesive man-
ufacturer.
15) After curing of adhesive, pour the water on ex-
ternal surface of vehicle to check that there are no
water leaks.
NOTE:
When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
16) Install the cowl panel. <Ref. to EI-30, INSTAL-
LATION, Cowl Panel.>
GW-00045
asieps_tobira.book 21 ページ ２０１２年２月１０日 金曜日 午後３時２６分