Subaru B9 TRIBECA WX 2007, Manual

Page: 375 / 861

EI-22
Front Bumper
EXTERIOR/INTERIOR TRIM
2. FRONT BUMPER BEAM ASSEMBLY
1) Remove the front bumper face.
2) Remove the energy absorber foam from bumper
beam.
3) Remove the bolts, and remove the bumper
beam assembly from vehicle body.
NOTE:
After all bolts are removed, lift the whole bumper
beam a little to remove it from vehicle body.
B: INSTALLATION
1. FRONT BUMPER FACE
1) Mount the bumper face securely in the gap be-
tween guide bracket (A) and fender (B).
2) Install in the reverse order of removal.
2. FRONT BUMPER BEAM ASSEMBLY
Install in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to EI-4, FRONT BUMPER, COM-
PONENT, General Description.>
EI-01271
EI-01272
(A)
(B)
asieps_tobira.book 22 ページ ２０１２年２月１０日 金曜日 午後３時２６分