Sony CXD5602 User Manual Download Page 925

Page: 925 / 1010

CXD5602 User Manual

－

925/1010

－



In the case that “failure” has been retuned as a result of exclusive access, write to the slave has not been

performed.

Success case of exclusive access



The snooping is released after an exclusive write (ExW) is issued from the master obtaining exclusive access

right to the target address to snoop. At this time, if exclusion process to the target address to snoop has been

successful, “success” will be returned. (refer to Figure APP-111)



An exclusive read access always receives “success” response. That is, “success” is returned even during one

exclusive read access’s snooping, another exclusive read access has occurred. After the other exclusive read

access’s occurrence, “success” is returned to the exclusive write access to the target address to snoop, issued

from the master obtaining exclusive access right. (refer to Figure APP-112)

Access phase

Respons phase

snoop_flag

exfail_flag

snoop_mid

snoop_addr

MID0

ExR

MID0

ExW

MID0

P S

success

Figure APP-111 Success Case 1 of Exclusive Access

snoop_flag

exfail_flag

snoop_mid

snoop_addr

MID0

ExR

MID0

ExW

MID0

P S

success

ExR

MID0

success

Access phase

Respons phase

Figure APP-112 Success Case 2 of Exclusive Access

Failure case of exclusive access



In the case that a usual write access (not an exclusive write access) occurs to a target address to snoop,

exclusive access processing is failed and the exclusive write access is blocked.

“Failure” will be returned at the timing of an exclusive write access from the master with the exclusive

access right. (refer to Figure APP-113)



In the case that an exclusive write access (ExW) occurs from the master without the exclusive access right to

Summary of Contents for CXD5602



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands

Sony CXD5602, User Manual

Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands