Sony CXD5602 User Manual Download Page 928

Page: 928 / 1010

CXD5602 User Manual

－

928/1010

－

3.13.4.16

Start and Stop Sequence of ADSP

This section explains power supply, clock, and ADSP’s recommended start and stop sequence including reset

control.

Precaution:

Cortex

-M4 processor with FPU has multiple clocks and resets. In this section, when without specific description

hereinafter, “clock” and “reset” means clock and reset of Cortex

-M4 processor with FPU core.

Read-modify-write operation to registers is needed so that bits other than designated bits of the write register will

not be changed.

Perform ADSP’s start control in the following order.

step1

Turn ON the power domain PWD_APP or supply clocks if

required.

For power supply control, refer to the PMU chapter.

step2

Turn ON the power domain PWD_APP if required.

Refer to 3.13.4.16.2 section.

step3

Start the ADSP.

Refer to 3.13.4.16.3 section.

Perform the ADSP’s stop control in the following order.

step1

Stop the ADSP.

Refer to 3.13.4.16.6 section.

step2

Turn OFF the power domain PWD_APP_DSP if required.

Refer to 3.13.4.16.7 section.

step3

Stop the clock, turn OFF the power domain PWD_APP if

required.

For power supply control, refer to the PMU chapter

3.4.

3.13.4.16.1

Start of Clock Supply for APP

Control the clock supply using System and I/O Processor.



Precondition

The power supply of the power domain PWD_APP must be ON. (For power supply control, refer to the

PMU chapter 3.4.)

Clock supply setting for APP

Control clock division ratio and clock source using the API.

Start of clock supply

APP_CKEN.APP

(CK_APP supply starts)

APP_CKEN.AHB

=1 (CK_APP_AHB supply starts)

APP_CKEN.MCLK

=1 (CK_APP_MCLK supply starts (only when AUDIO is used))

Summary of Contents for CXD5602



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands

Sony CXD5602, User Manual

Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands