Sony CXD5602 User Manual Download Page 295

Page: 295 / 1010

CXD5602 User Manual

－

295/1010

－

transition does not have to be checked). The judgement is “true” if the corresponding sequencer or ADC has been

completed in accordance with the CPU request.

3.9.9.12.2

Suspension Judgement

The following event notifies the suspension of operations.



SEQ0 to 9 has completed one main loop’s worth of processing and the operation has suspended.

This function is for changing settings (mainly the Decimator’s dynamic connection) from the CPU during the

suspension state of the MATH_PROC (when the data that was input to the MATH_PROC is output, and the

internal sequencer is transferred to the FIFO). The following describes an example of changing setting of

MATH_PROC by using this suspension judgement.

SEQ

MATH_PROC

Processing

Process

ing

START_CTRL

interrupt

HPADC0_ACCESS

_INHIBIT_REQ

Process

ing

CPU

(1) (2) (3)

(4)

(5)

CPU can change the configuration

of MATH_PROC in this period.

Processing

HPADC1_ACCESS

_INHIBIT_REQ

SYNCHRO_CPU2iSoP

interrupt

(6)

Figure SCU (Sensor Control Unit)-81 MATH_PROC Parameter Change (Example)

In the above Figure, the CPU performs the following controls.

(1) Sets HPADC0_ACCESS_INHIBIT_REQ to “1” (release and inhibition of SCU SLEEP).

(2) Completes the sequencer within the SCU_RAM and sets the suspend request sequencer number

(SYNCHRO_CPU2iSoP, refer to Section 3.9.12.11.14.)

(3) Sets the HPADC1_ACCESS_INHIBIT_REQ to “1” (suspend interrupt request), clears the interrupt factor,

Summary of Contents for CXD5602



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands

Sony CXD5602, User Manual

Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands