Sony CXD5602 User Manual Download Page 916

Page: 916 / 1010

CXD5602 User Manual

－

916/1010

－

3.13.4.10

Debug Function

For debugging of each ADSP, Serial Wire Debug (two-wire protocol) can be used. It supports the following

functions.

Table APP-757 Debug Function List

Function Name

Description

Multi-Core-Debug

Embedded multi-core debug function is supported.

System-Debug

System debug function is supported. Without halting the ADSP, debug access to the memories is possible.

Debugger

AS Integrated Development Environment of Embedded multi-core,

YDC advice LUNA II (customized for CXD5602) environment can be used.

Arm

DS-5 environment and DSTREAM as debug adaptor are supported. (The number of processors

which can be debugged simultaneously is limited.)

FPB

Eight-breakpoint function is equipped including FPB (4K) in the configuration of Cortex

-M4 processor

with FPU. FPB unit contains the following components:

・

Two literal comparators

Two literal comparators for matching against literal loads from Code space, and remapping to a

corresponding area in System space.

・

Six instruction comparators

Six instruction comparators for matching against instruction fetches from Code space, and remapping to a

corresponding area in System space. Alternatively, you can configure the comparators individually to

return a Breakpoint Instruction (BKPT) to the processor core on a match, to provide hardware breakpoint

capability.

DWT

Four-watchpoint function is supported including a reduced DWT (7K) to the configuration of Cortex

-M4

processor with FPU.

ITM

Instrumentation Trace Macrocell (ITM) function in Cortex

-M4 processor with FPU is supported.

TRACE

Data tracing and software tracing functions using ITM/DWT features of Cortex

-M4 processor with FPU

are supported. Clock synchronized signals are output from Tracedata.

AUTH

Debug I/F Authentication function is supported.

Summary of Contents for CXD5602



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands

Sony CXD5602, User Manual

Search results

Summary of Contents for CXD5602

Reviews:

Related manuals for CXD5602

Brands by name

Popular brands