manualshive.com logo in svg

NI 7935R, Getting Started Manual

Share
Download
NI 7935R Getting Started Manual Download Page 1

GETTING STARTED GUIDE

NI-7935R

Controller for FlexRIO

™

This document describes how to begin using the NI-7935R.

Figure 1.

 NI-7935R

Related Information

For information about the device specifications, refer to the NI-7935R Specifications at
ni.com/manuals.

Contents

FlexRIO Documentation........................................................................................................... 2
Safety Guidelines...................................................................................................................... 4
Electromagnetic Compatibility Guidelines...............................................................................4
Verifying the System Requirements..........................................................................................4
What You Need to Get Started..................................................................................................5
Unpacking the Kit..................................................................................................................... 5
Preparing the Environment....................................................................................................... 6
Wiring Power to the NI-7935R................................................................................................. 6
Powering on the NI-7935R....................................................................................................... 7

STATUS LED....................................................................................................................7

Summary of Contents for 7935R



















Reviews:

No comments

Brands by name

Popular brands

Load more brands