Sony CXD5602, User Manual

Page: 840 / 1010

CXD5602 User Manual
－
840/1010
－
[16] FIFO_RESET 1 Resets the FIFO writing side
0x0018
0318
[30:16] TIME_STAMP_INTERV
AL
Sets the intervals of FIFO writing (only for
virtual sensor partition)
V9_W_
C
0x0018
0320
[31:16] FIFO_START_OFST Selects the partition start address
[15:0] FIFO_PARTITION_SIZE Selects the partition size
0x0018
0324
[3:0] FIFO_SAMPLE_SIZE Selects the number of Bytes per sample
[4] OVERWRITE_IF_FULL Selects the operation mode during FIFO full
[16] FIFO_RESET 1 Resets the FIFO writing side
0x0018
0338
[30:16] TIME_STAMP_INTERV
AL
Sets the intervals of FIFO writing (only for
virtual sensor partition).
Table SCU (Sensor Control Unit)-714 FIFO Readout Side Initial Settings
FIFO
Partition
Address bit Name Setting
Values
Descriptions
--- 0x00195400 [22:9] ALMOST_FULL 1 Almost Full Interrupt Permission (optional)
[9]D0_R1_C [10]D0_R2_C [11]D1_R1_C
[12]D1_R2_C [13]N0_R1_C [14]N1_R1_C
[15]N2_R1_C [16]N3_R1_C [17]N4_R1_C
[18]N5_R1_C [19]N6_R1_C [20]N7_R1_C
[21]D0_R3_CH [22]D1_R3_CH
--- 0x00195420 [22:9] OVER_RUN 1 Enables writing occurrence error interrupt
during Full (optional)
For bit assignment, refer to ALMOST_FULL
--- 0x00195440 [22:9] UNDER_RUN 1 Enables readout occurrence error interrupt
during Empty (optional)
For bit assignment, refer to ALMOST_FULL
D0_R1_
C
0x00181000 [15:0] WATER_MARK Sets Watermark
0x00181004 [25] FIFO_DMA_ENAB
LE
Sets output permission of DMA handshake
signal
0: disable 1: enable
[24] FIFO_ENABLE 1 Readout side FIFO operation permission
0: disable 1: enable
[16] FIFO_RESET 1 Resets the readout side FIFO
D0_R2_
C
0x00181020 [15:0] WATER_MARK Sets Watermark
0x00181024 [25] FIFO_DMA_ENAB
LE
Sets output permission of DMA handshake
signal
[24] FIFO_ENABLE 1 Readout side FIFO operation permission
[16] FIFO_RESET 1 Resets the readout side FIFO