Smiths Medical 2120 Operator'S Manual Download Page 69

Page: 69 / 152

Taper Delivery Mode

mmi

Taper Delivery Mode

Taper delivery allows the infusion of nutritional solutions (TPN, total parenteral nutrition) or other

fluids, with optional tapering. Delivery can be gradually increased, or tapered up, at the beginning of the

infusion, and it can be gradually decreased, or tapered down, at the end of the infusion. An optional KVO

(keep vein open) rate may be delivered at the end of the infusion, depending on protocol settings.
The following graph illustrates an example taper delivery:

Home Screen

The delivery mode and status of the infusion are indicated on the home screen with messages appearing

in text, a graphic in a shape unique to the therapy, and with the colors green, red, and gray. The

colors indicate that the pump is running (green), or stopped (red). If a new patient or new infusion is

programmed but

the pump has not been started,

or if a delayed start time was programmed and the start

time passed while the pump was stopped and not yet started, the graphic is entirely gray. The location of

the color on the graphic also indicates the status of the infusion. The graphic used for taper delivery also

identifies if taper up and/or taper down are programmed as part of the delivery setting. The examples

below are specific to the taper delivery mode.

•

The pump is running with a programmed delayed start.

•

The pump is stopped at the plateau rate.

•

The pump is running at the plateau rate. No taper up was programmed.

•

The pump is running at taper up.

•

The pump is running at taper down.

•

The pump is running at the KVO rate, nearing the end of the infusion.

Taper delivery mode graphics do

not

depict the relative slope of the taper or the relative duration of the

tapers in comparison to the plateau.

Infusion Duration

Plateau Rate

Taper

Down

Infusion Volume

Time

Deliv

y R

Delayed start

(optional)

KVO

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands