Smiths Medical 2120 Operator'S Manual Download Page 107

Page: 107 / 152

107

Tasks and Advanced Tasks

s a

anc

ed T
as

Reservoir Empty Alarm Type

The reservoir empty alarm type option allows you to select between two types of alarms when the reservoir

is empty:

One Time Only:

When a reservoir empty alarm occurs, you must press a button to acknowledge or silence

the alarm. This alarm does not reoccur once it has been acknowledged.

Repeat Until Removed or Reset:

When a reservoir empty alarm occurs, you must press a button to

acknowledge or silence the alarm. The alarm is repeated every 5 minutes until the reservoir volume has

been set to a new value, the reservoir is removed, or the pump is powered down.

To set the reservoir empty alarm type:

1. Make certain the pump is stopped.
2. In the Alarm Settings menu, press

to highlight

Reservoir

Empty Alarm Type

and press

3. Unlock the keypad.
4. Press

to highlight

One Time Only

Repeat Until

Removed or Reset,

and select

Save.

PM Reminder On/Off

If your facility establishes a maintenance program for the pump, you can use the PM reminder on/off

option to program the pump to sound an alarm when it is time for preventive maintenance. The message

begins appearing on the date programmed and during every power up until the date is reset. Use the PM

reminder on/off screen to turn the alarm on and then continue to the PM reminder screen to specify the

interval at which the message should appear, or use it to reset the reminder.

To turn the PM reminder on or off:

1. Make certain the pump is stopped.
2. In the Alarm Settings menu, press

to highlight

Reminder On/Off

and press

3. Unlock the keypad.
4. Press

to highlight

Off

On,

and select

Save.

5. If you set the

PM Reminder On/Off

to On, press

to highlight

PM Reminder

and press

Instructions for scheduling the PM Reminder are in the next section.

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands