Smiths Medical 2120 Operator'S Manual Download Page 91

Page: 91 / 152

Tasks and Advanced Tasks

s a

anc

ed T
as

Key Beep On/Off

The key beep on/off feature allows you to turn on or off the audible beep that accompanies each key press.

This feature

does not

turn off any audible alarms associated with alarm or alert conditions of the pump.

NOTE:

If the key beep feature is turned on, the key beeps will not sound while any alarm screens are being

displayed or when entering a security code.

To turn the key beeps on or off:

1. In the Display and Sounds Settings menu, press

to highlight

Key Beep On/Off

and press

2. Press

to highlight

Off

and select

Save.

Numeric Format

The numeric format setting allows you to select the character or space used to indicate the decimal point

and thousands units separators. The formats available are:

•

1,234.56

•

1.234,56

•

1 234.56

•

1 234,56

To modify the numeric format:

1. In the Display and Sounds Settings menu, press

to highlight

Numeric Format

and press

2. Unlock the keypad.
3. Press

to highlight the format you want and select

Save.

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands