Smiths Medical 2120 Operator'S Manual Download Page 92

Page: 92 / 152

Tasks and Advanced Tasks

s a

anc

ed T

Time and Date

The Change Time and Date setting allows you to edit the time and date, and to choose a time and date

format. The time and date options should reflect the current time and date. The clock is powered by a

separate, internal battery, which retains the time and date even when the 4 AA batteries or the battery

pack is removed. The pump uses this feature to record the time and date of events in the delivery and event

logs, and in other reports. It is also used to determine when delayed starts and next dose start times begin,

and when preventive maintenance alarms occur.

NOTE:

The internal battery is rechargeable and automatically recharges when the pump is powered on. If

the pump is off for a long period of time, it may not show the correct time and date when it is powered

on. Check the time and date, and edit these settings if necessary.

CAUTION:

If delivery of an infusion is affected by a time or date change, an alarm message appears

and must be confirmed.

In the Tasks menu, press

to highlight

Change Time and

Date

and press

Current Time

To set the current time:

1. In the Change Time and Date menu, press

to highlight

Current Time

and press

2. Press

to scroll to the correct hour and press

navigate to the minutes.

3. Press

to scroll to the correct minutes and press

navigate to the am or pm field.

4. Press

to scroll between am and pm and press

when

the correct setting appears. If you are using a 24-hour clock, the am/pm

field does not appear. Select

Save.

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands