Smiths Medical 2120 Operator'S Manual Download Page 23

Page: 23 / 152

General Description

ene

cri

ion

Keypad Security

Under the Keypad Security setting, you may allow the use of the cassette/keypad lock to unlock the

keypad. This is done by selecting the Code or Key setting. The use of the key to unlock the keypad allows

the same permissions as the keypad code. If the Code Only option is selected, the key will not unlock the

keypad.

Note:

If the Code Or Key setting is selected, using the key to unlock the keypad is equivalent to entering

the keypad code. Use of the key allows clinician or administrator code level access

only if

the keypad

code is customized to be the same number as the clinician or administrator code.

To set the keypad security:

1. From the Security Settings menu, press

to highlight

Keypad

Security

and press

2. Unlock the keypad.
3. Press

to highlight

Code Only

Code Or Key

and select

Save.

Keypad Code

This screen allows you to create a keypad code that is unique to your facility.

Note:

The keypad code changes only for the current protocol. The change remains in effect until another

protocol is chosen or the same protocol is chosen by using either the Start New Patient task or the Start

New Protocol, Same Patient task.

To set the keypad code:

1. From the Security Settings menu, press

to highlight

Keypad

Code

and press

2. Unlock the keypad.
3. Choose any 3-digit combination of numbers from 001 to 899. Press

to enter the new code. Press

to advance to the next digit.

Once the code has been entered, select

Accept Value.

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands