Smiths Medical 2120 Operator'S Manual Download Page 58

Page: 58 / 152

Intermittent Delivery Mode

rmi

mmi

Stopping the Pump During an Infusion

Stopping the pump

between doses

does not affect the start time of subsequent doses.

Stopping the pump

while a dose is in progress

shifts all subsequent doses by the amount of time the pump

is stopped (see illustration).

If you want to make up for the time lost in the cycle because the pump was stopped during a dose,

wait

until the current dose is completed.

Then, stop the pump and reprogram the Next Dose Start Time. For

additional information, see

Next Dose Start Time

on page 32.

Resuming the Dose

To resume delivery of a dose stopped in progress, simply restart the pump by pressing stop/start

Resetting the Cycle

To reset the cycle, stop the pump between doses, and reprogram the Next Dose Start Time.
When a dose is stopped in progress, the “Interrupted” screen appears. To cancel the current dose and reset

the cycle, reprogram the Next Dose Start Time through the Tasks menu. The next cycle will start at the

time you select.
See

Next Dose Start Time

on page 32 for more information on setting the Next Dose Start Time.

Time

Deliv

y R

KVO

Dose

Pump

stopped

for 10 min

Subsequent

doses shift

by 10 min

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands