Smiths Medical 2120 Operator'S Manual Download Page 15

Page: 15 / 152

General Description

ene

cri

ion

Accessories

CAUTION:

Use only Smiths Medical accessories that are specified for use with the CADD

-Solis

ambulatory infusion pump, as other brands may adversely affect pump operations.

All CADD

-Solis accessories may be obtained through the Customer Service department at Smiths

Medical. For detailed instructions and warnings applicable to each accessory, refer to the instructions for

use provided with the product.

CADD

-Solis Medication Safety Software

The CADD

-Solis Medication Safety Software allows you to create and manage protocol libraries and then

send them to the pump. See the installation guide and online help for more information.

AC Adapter

The AC adapter can be used as an alternate source of power for the pump and/or to recharge

the rechargeable battery pack. The pump requires 4 AA batteries or the rechargeable battery

pack to be installed as a backup while using the AC adapter.

Rechargeable Battery Pack

The rechargeable battery pack is an alternative to using 4 AA batteries. The rechargeable

battery pack can be recharged with the AC adapter, either inside or outside of the pump.

Remote Dose Cord

The remote dose cord can be attached to the pump and provided to the patient as an

alternative to pushing the PCA dose

key to request a PCA dose.

Polemount Bracket

The polemount bracket is used along with the polemount bracket adapter to attach the pump

to an IV pole.

Polemount Bracket Adapter

The polemount bracket adapter attaches to the back of the pump so that it can be hung from an

IV pole or in a lockbox.

Polemount Swivel

The polemount swivel allows the pump to rotate while it is attached to the CADD

-Solis

polemount bracket. With the swivel attached, the pump can be tilted or rotated 230° for easy

viewing of the display. The swivel can not be used in a LockBox.

Pump Key

The pump key is used to securely lock a cassette to the pump. It can also be used to lock and

unlock the keypad, if allowed by the protocol setting.

Pouches and Backpacks

Several styles of pump pouches and backpacks are available. They can carry a

CADD

-Solis ambulatory infusion pump with either a CADD

™

medication cassette

reservoir (50 mL to 250 mL) or a flexible, plastic IV bag up to 3 liters.

LockBox

Clear and yellow lockboxes are available to hold both the CADD

-Solis ambulatory

infusion pump and a CADD

™

medication reservoir. The pump attaches to the lockbox with

a polemount bracket adapter and the lockbox can be attached to an IV pole. The lockbox

allows for viewing of its contents and access to the keypad, remote dose cord jack, and AC

power jack.

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands