Smiths Medical 2120 Operator'S Manual Download Page 98

Page: 98 / 152

Tasks and Advanced Tasks

s a

anc

ed T

Event Log

The pump records the time and date of each event, and lists events in order, with the most recent at the

bottom of the screen through the last 5000 events. The event log information includes but is not limited to:

•

Hourly given totals

•

Power source changes

•

Delivery related events

•

Cassette changes

•

Alarms

•

Protocol library changes

•

Error codes

•

Changes to pump programming or settings

To view the Event Log:

1. In the View Reports menu, press

to highlight

Event Log

and press

2. While viewing the event log, you may quickly scroll from the oldest to

the newest entries by selecting

Show Oldest

Show Newest.

Protocol Library Summary

The protocol library summary allows you to view information about the protocol library currently

installed in the pump. This screen tells you the name of the protocol library, the revision, and the number

of protocols in the library.

To view the Protocol Library Summary:

In the View Reports menu, press

to highlight

Protocol Library

Summary

and press

Device Information

The device information screen allows you to view the information about the pump, including:

•

Serial number

•

Motor processor (MP) hardware and software revision

•

Software version

•

Language revision

•

User interface (UI) hardware revision

•

Last error code (if one exists)

NOTE:

Follow your facility’s procedure for handling error codes. See

Alarms and Messages

on page 110 for

more information.

To view the Device Information:

In the View Reports menu, press

to highlight

Device Information

and

press

Summary of Contents for 2120

























































































































































Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands

Smiths Medical 2120, Operator'S Manual

Search results

Summary of Contents for 2120

Reviews:

Related manuals for 2120

Brands by name

Popular brands