User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
For
MultiLevel Access
mode there is a possibility to login by connecting your own USB
flash drive to the device, later called Hardware key. The Hardware key allows user to login
without using password but only by plugging the key into the device. Removing the hardware
key causes immediate logout. One key can be assigned to one user only and also user can
only have one key.
Hardware key options are always available but they are active only in devices with
are having Access Dongle licence activated (for more information about the license
key see
Chapter 7.4. DEVICE INFORMATION, LICENCE, FIRMWARE UPDATE,
REMOTE DISPLAY, EXPORT MANUAL AND RENEW CONFIGURATION
). Those
devices which don't have Hardware key licence activated following message will be
displayed in
User list
menu:
“Enter licence to use Dongle”
Access options parameters are:
–
Access mode
– allows to select protection mode from unauthorized usage,
•
single level
– protects whole menu from unauthorized changes with one
password. User which is currently logged in, can freely configure the device until
manual or automatic logout,
•
MultiLevel
– allows to configure settings for Administrator and up to 15 users
with different access levels and independent passwords,
–
Access password
– password which is required to log in while using single-level
access mode (unless it's left empty),
–
Access timeout
– time in minutes which will elapse from last interaction with the
device to automatic logout. Value of 0 means that the user will be logout immediately
after closing protected menu. Each new attempt to entry into the protected menu will
require a password once again; Available only for
MultiLevel Access
mode,
–
Users list
– menu containing Administrator's and user's access settings; Visible only
for
MultiLevel Access
mode,
•
Name
– used during authentication process,
•
Password
– used for authentication selected user, can be left empty,
•
Permissions
– menu containing device's functionalities which can be assigned
to the users. Every user will get access to only those functionalities which were
earlier assigned to his permission list,
•
Access dongle
– number of the hardware key assigned to the user,
•
Assign dongle
– button which assigns hardware key (currently connected flash
disk) to selected user,
•
Remove dongle
– button which removes earlier assigned hardware key,
Fig. 7.131. Single-level password entering window
226
i
