Simex multicon cmc-141, User Manual

Page: 85 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
see Fig. 4.8
Fig. 7.42. The view of a sample list of available hardware inputs for a device
In the device there are two methods to change the source configuration of the
Built-in inputs
:
•
using Configure source button in Logical channel menu in Hardware
input mode,
•
using the Built-in inputs menu,
The
Source
for
Hardware input
mode can be (in the same order as list in the device - see
Fig. 7.42
):
a) installed input modules in the appropriate slots A, B or C (see Fig. 4.8 ) - the list of
currently available modules is on the website,
Description of input modules parameters is shown in Chapter 7.9.2. Built-in inputs - Input
modules .
The following steps change the
Source configuration
for the sample of 3 modules shown in
Fig. 7.43
:
– Step (1) - selection of Source for channel in Hardware input mode, for example:
Inp.A1:Current , next press the Configure source button to enter Source
configuration menu,
– Step
(2)
- press the
Mode
button to change range of the current input,
– Step
(3)
- choose from the list of available options for signal range - for example:
Current 0-20mA (for current module),
85
Slot A, Input 1
Slot X (built-in slot)
Input 4
I16 Module
16 current inputs
Built-in binary input
Built-in Demo input
i