User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.8.8.
Logical
Channels - Profile/timer mode
This mode allows the user to set up appropriate Profile/timer defined in
Profiles/timers
menu which may generate signal defined by the user to display on the screen, processed in
any other logical channels or it can be the data source for output to the control and settings of
any object. To create
Profile/timer
the
Logical Channel
should be set in
Profile/timer
mode
Fig. 7.56. View of the input channel configuration in Profile/timer mode
The parameters of the
Logical channel
in
Profile/timer
mode should be:
–
Name
- it gives the name to the logical channel,
–
Unit
- to create unit use the
Scaling
parameter in
Processing
parameter block (for
more information see
Chapter 7.8.1. Logical Channels - General settings
–
Mode=Profile/timer
- in this parameter user selects source of data for logical
channel,
–
Source
- this parameter allows the user to select a Profile/timer from the list
(
8 Profiles/timers
are implemented in the device), which selected option will be data
source for this logical channel. User must configure the selected Profile/timer by
pressing the
Configure source
button or enter into the
Profiles/timers
menu
(overview and configuration parameters that define the Profiles/timers can be found
in
Chapter 7.12. PROFILES/TIMERS
–
Configure source
- this button allows the user to configure
Profile/timer
selected in
the
Source
parameter. For more information see below in this
Chapter
,
107
disabled
Hardware input
Hardware output monitor
Modbus
Set point value
Math function
Controller
Profile/timer
Profile/timer (cycle counter)
Data from other channel
Logical channel
Device configuration
MENU
Mode
