User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
In the next step you need to define
Group
the set up logical channels to view them in one
window on the screen. To do this:
–
enter the
Group
menu, to enable the Group 1 if it is off,
–
in
Name
write
Temp.Measurment
,
–
for
Channels
block parameters:
•
Slot 1
parameter set as
logical channel 1
called the
Temperature A1
,
•
Slot 2
parameter set as
logical channel 2
called the
Temperature A1
,
•
Slot 3
parameter set as
logical channel 3
called the
Temperature A1
,
•
Slot 4
parameter set as
logical channel 4
called the
Temperature A4
,
•
Slot 5
parameter set as
logical channel 5
called the
Alarm state
,
•
Slot 6
parameter set as
disabled
,
–
all other parameters should be on default settings,
The last step is to define the Initial view displayed on the LCD screen when the device starts.
Initial View has to display a defined group of logical channels: 1, 2, 3, 4, 5 in value mode. To
do this:
–
enter in the
General settings
menu,
–
Basic
block parameters left unchanged unless indicated date and time were to set
incorrectly and should be improved,
–
for
LCD screen
block parameters:
•
Backlight
parameter set to a value corresponding to the user, for example
80%
,
–
for
Screen saver
block parameters:
•
Mode parameter set as
disabled
, as in this example we want to display all the
time
Backlight
with the same clarity,
–
for
Initial view
block parameters:
•
Display
mode
parameter set as
value
,
•
Displayed group
parameter set as
Group 1: Temp.Measurment
,
–
for the
Automatic view change
block parameters:
•
Change mode
parameter set to disabled, as in this example we want to all the
time displayed only
Group 1
in the same needle mode,
–
after setting all parameters exit the
General settings
menu,
Finally, you must exit the menu by pressing the
Save changes
button. The result of the
changes will be visible after a call to the first measurement and manual switch for displaying
Group 1. Example of a window view for 5 logical channels is shown in
Fig. 7.64. The proposition of the result the Example 2
120
