User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Manual operation of a button in the data panel
Action button in the data panel depends on the parameters from
Latch
block (description of
the
Latch
7.8.1. Logical Channels - General settings
) and on
the
Format
parameter in the
Displaying
parameter block (description of the
Displaying
7.8.1. Logical Channels - General settings
a)
for disabled latch function
For format:
–
numeric
and
time
– after pressing the button an edit window appears allowing entry
), this value will be a source of data for that Logical channel,
–
binary
- pressing the button causes a switch between the states (
'0'
and
'1'
) display
in the data panel in accordance with the text states set in the parameters:
Off-state
text
(channel value =
'0'
) and
On-state text
(channel value =
'1'
) in the
Displaying
parameter block,
b)
for enabled latch function
For format:
–
numeric
and
time
– after pressing the button an edit window appears allowing entry
), which enters the new value that isn’t a data source for this
channel but the value stored at the time of activation of the latch function, in the edit
window the value of the button still appears a new value which will be the data
source for that logical channel by disabling the latch function,
–
binary
- pressing the button does not switch between the states (
'0'
and
'1'
)
displayed in the data panel in accordance with the text states set in the parameters:
Off-state text
(channel value =
'0'
) and
On-state text
(channel value =
'1'
) in the
Displaying
parameter block, but with each new press of the button the state of
button is stored in the buffer and set the value of logical channel with the currently
stored state when the latch function is disabled again.
Fig. 7.51. Manual operation of the button for numeric and binary format
94
2
3
1
1
2
