User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Example:
Steps to create four views are as follows:
1.
In the Change mode parameter select detailed list,
2.
Press the
Setup list
button and enter the
View
menu,
3.
Set parameters for a first View,
Arrows placed in the upper right corner of the screen allow you to
move to the next view. The middle button allows direct selection of a
particular view.
4.
To add or delete further views use the
Add a new view
button or
Delete this view
button, respectively,
5.
When the user wants to add a view between the existing views, e.g. between views 2
and 3, user can choose two ways:
•
select the 2nd view (by the arrows in the upper right corner of the screen) and
then add a new view by clicking the
Add a new view
button,
•
after adding new view on the end of the list, the
Move to position
parameter set
as
3
value,
6.
When finished, the user can see all the defined views by clicking the middle button
between the arrows in the upper right corner of the screen,
66
