User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.19.
NOTIFICATIONS
This button is visible in all devices but only in these ones with Notifications licence
this functionality will work. Devices without Notification licence will display in
Notifications menu following message:
“
Available after entering licence
”
Notifications
menus allows to send messages using e-mail. Each message can
contains any description and attachment with selected
Logical channels
or
Groups
.
Notifications can be used as devices state report when alarm or specified signal occurs. This
report will be send to all declared recipients.
In case on any sending error (e.g. connection with network error) messages can be
saved in queue where they are waiting to be send, however sending and saving to queue can
not occur more often then once a minute which means that any faster than one minute
message trigger will be ignored. Additionally this queue can not be longer than 10 messages
and when it fills up appearance of new message will delete the oldest one and the new one
will be placed into the queue. When the connection will be re-established the device will send
messages in queue as one e-mail with all awaiting attachments. All messages from all the
queues will be lost when the device will be switch off or when power fails.
There are 32 available
Messages
which can be configured independently and each of it
can be send to several recipients.
Attachment with
Logical channels
has following structure:
File name:
serial_number
_Ch_
data
_
hour
_
minute
_
second
_msgID=
Message_number
_
Suffix
.csv
File content – first row:
“Channel Number”,”Channel Name”,”Value”,”Unit”
File content – next rows:
selected_channel_number
,”
Channel_name
”,
Channel_value
,”
unit
”
Each Logical channel is stored in new line of the file.
231
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
Notifications
Device configuration
MENU
i
