Simex multicon cmc-141, User Manual

Page: 137 / 300

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.9. BUILT-IN INPUTS
The
Built-in inputs
menu is directly related to the available inputs installed in the device. The
basic version includes inputs:
– built-in Digital input is always marked as Inp.X2:Digital 24V - more about it see
Chapter 7.9.3. Built-in inputs - Binary input Inp.X2 : Digital 24V ,
– 3 built-in Demo inputs marked as Inp.X3 : Demo , Inp.X4 : Demo , Inp.X5 : Demo -
more about them see
Chapter 7.9.4. Built-in inputs - Demo input numbered X3,
X4, X5
,
Depending on customer's needs, input modules (description of available input modules is
provided in
Chapter 8. APPENDICES and the producer's website) can be installed in
respective slots A, B or C (location of slot see Fig. 4.8 ).
7.9.1. Built-in inputs - General settings
Available in the device in the basic configuration is 4 Built-in inputs ( Digital input and
3 Demo inputs ) and input modules installed in the device depending on the customer's
needs. Configured inputs can be used to control any process or can be used by any logical
channel. Switch to
Hardware input mode in order to visualize the result, or use for further
processing.
Arrows placed in the upper right corner of the screen allow you to
switch between built-in inputs. The middle button allows you to directly
select a specific built-in input from the list.
Common parameter for all Built-in inputs is Name – each inputs has its own unique name
and it can not be changed – description of this parameter see Fig. 7.75 .
137
Device configuration MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
Notifications