User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.10.
BUILT-IN OUTPUTS
Build-in outputs
menu is directly related to the available outputs installed in the device.
The basic version includes outputs:
–
built-in
Sound signal
output is always marked as
Out.X1: Sound signal
- more
about the
Sound signal
output see
Chapter 7.10.2. Built-in Output - Relays,
–
16 built-in
Virtual relays
marked as
Out.V1: Virtual relay ÷ Out.V16: Virtual relay
-
more about
Virtual relays
see
Chapter 7.10.2. Built-in Output - Relays, Sound
Depending on customer's needs output modules (description of available output modules is
provided in
Chapter 8. APPENDICES
and the producer's website) can be installed in
respective slots A, B or C (location of slot see
7.10.1.
Built-in outputs - General settings
Available in the device in the basic configuration is
17
Built-in outputs
(
Sound signal
and
16 Virtual relays
) and output modules installed in the device depending on customer's needs.
Configured output can be used to control any process or can be used by any logical channel
switched to
Hardware output monitor
mode in order to visualize the result, or used for
further processing the output data.
Arrows placed in the upper right corner of the screen allow you to
switch between built-in outputs. The middle button allows you to directly
select a specific built-in output from the list.
Parameters common for
Built-in outputs
:
–
Name
- each output already has a name given by the device and user cannot
change it, for description of
Name
–
Source
– this parameter contains a list of logical channels (up to 60), where the
selected logical channel will be a data source for this built-in output (see
152
Device configuration
MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
Notifications