User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
◦
disabled
- this option turns off screen savers, the LCD screen is illuminated
at all times according to parameter settings:
Backlight
(see above
Screen
saver
parameter block )
◦
1min, 5min, 10min, 30min
,
•
Brightness
- this parameter is hidden for
Mode = disabled
, in the other modes
(
1min
,
5min
,
10min
,
30min
) this parameter is visible, the user can change the
brightness level of the LCD screen after time set in parameter
Mode
elapses.
The options are:
0%
(screen blank),
20%
,
40%
,
60%
,
–
Initial view
parameter block - allows the user to set the initial display screen on the
LCD screen when the device is turned on, this block includes two parameters:
•
Display mode
- select the presentation of data in the displayed group (see
parameter:
Displayed group
). For possible modes see
Chapter 6.3.3. Data
Chapter 7.14. GROUPS
•
Displayed group
- selects a group displayed at startup. If
Display mode
is
chosen as
many groups
, parameter
Displayed
group
selects the first of five
following groups displayed on the screen (
many group
mode presents 5 groups
in one window). For example, when the user sets
Display group
as
Group 8
then the unit will display: starting from the left side of: Group 8 -> Group 9 ->
Group 10 -> Group 1 -> Group 2,
–
Automatic view change
parameter block - this parameter block allows the user to
set the display to change every time period. The parameters of this block include:
•
Change mode
- this parameter has the following options:
◦
disabled
- no changes in the display. For this mode the remaining
parameters in this block are not visible,
◦
change modes
- allows the user to automatically change the displayed
mode,
◦
change groups
- allows the user to automatically change displayed group,
◦
detailed list
- allows to automatically change displayed views defined by
the user,
•
Triggering mode
– this parameter has the following options:
◦
by time
– it enables to change displayed view at fixed time intervals,
◦
from log. channel
– changes displayed view depending on value in
selected logical channel. If value in this channel is less than 1, displayed
view number is 1, if value in this parameter equal or more than 1 but less
than 2 displayed view number is 2, and so on. The last defined view does
not has the upper limit.
•
Display time
– this parameter is visible for the
Change mode
:
change modes
,
change groups
– duration (set in seconds) for each screen,
•
Triggering source
– this parameter is visible for the
Change mode
:
change modes
,
change groups
, and for the
Triggering mode
:
from log. channel
; it allows the user to choose logical channel from the list,
which value will sets up the displaying view,
•
Change timeout
– this parameter determines the time from the device startup
or manually change of the view to first automatic view change,
•
Setup list
– this button is visible for
Change mode
parameter setted as
detailed list
, this parameter is described below in this
Chapter
,
64
