User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
7.8.
LOGICAL CHANNELS
The
Logical channels
menu is used to configure the logical channels. Channels can be
treated as input data for outputs, controllers or other
Logical channels
and can be collected
into
Groups
for simultaneous display. To see a detailed definition of
Logical Channel
see
Chapter 5.1.1. Logical channels
To enter directly into the configuration menu of particular channel, press and hold
on the screen over the channel data panel for a few seconds (see option
(1)
in the
). If the password is set (see
Chapter 7.17. ACCESS OPTIONS
) then the
user has to enter the password before entering the configuration.
7.8.1.
Logical Channels - General settings
Arrows placed in the upper right corner of the screen allow you to
switch between a succession of logical channels. The middle button
allows you to directly select a specific logical channel from the list.
The parameters of a logical channel depends on the
Mode
of the logical channel. The
Logical channel
has modes:
–
disabled
–
Hardware input
–
Hardware output monitor
–
Modbus
–
Set point value
–
Math function
–
Controller
–
Profile/timer
–
Profile/timer (cycle counter)
–
Data from other channel
A detailed description of the models is in the following chapters.
67
i
Device configuration
MENU
General settings
Logical channels
Built-in inputs
Built-in outputs
External outputs
Profiles/timers
Controllers
Groups
Modbus
Network settings
Access options
Printouts
Notifications
