5-22
Suggestions for media advance value
The changes mentioned below can cause media advance value to vary.
Condition
Hint
¢
Variation of media condition
Depending on (1) type of
media, width and roll length
and (2) change of roll diameter
as used, the appropriate media
advance value varies.
In addition to the factors mentioned to the left,
even if the media type is same, non-uniformed
manufacturing can cause the media advance to
vary.
Therefore, when replacing a roll, setting the
media advance value must be performed.
(
P.4-28
)
¢
When changing the take-
up mode of the winding
equipment, the appropriate
media advance value varies.
When setting to [loose winding], the appropriate
media advance value is greater than [tension
winding]. (
P.3-28
)
¢
When changing the print mode,
the appropriate media advance
value will vary.
The greater the number of passes is, the greater
the correct media advance value will be.
(
P.3-25
)
¢
The appropriate media advance
value differs in the Print heads
of each color.
Normally, it is recommended to set the averaged
value of 4 colors. However, set the important
color suitable for print data.
¢
The correct media advance
value differs between right and
left sides of media.
Normally, it is recommended to set the averaged
value of right and left values. However, set the
important position suitable for print data as a top
priority.
¢
When media is easy to adhere
to the paper guide like banner.
It is recommended that you set the media
advance correction value by printing the media
advance correction pattern and then make
adjustment while changing the correction value
during printing of an actual image.
-
After setting the media advance value determined from the media advance adjustment
pattern, it is possible to improve image quality further by adjusting the media advance
value while printing.
(
P.4-32 [Change during online printing]
)
IP-5610取説_E.indb 22
09.4.3 3:15:52 PM
