2-26
How to switch the pressure
Switch over the pressure between the media feeding pressure roller and the grit
wheel when using different medias.
The bottom position is normally used. When skew occurs in the media and the
media cannot be fed or when the media with weak elasticity such as a thin cloth,
switch to [weak] the center position. The pressure force is switched by the posi-
tion of the pressure roller up / down lever. (See figure below.)
<No pressure> (top)
When loading the media, raise
the lever. This the normal UP
position.
[Rear]
[Front]
<Normal Pressure> (bottom)
When loading the media, lower
the lever. It is the normal DOWN
position.
<Weak> (In the center)
The pressure force becomes
weak.
<No Pressure> (top)
When loading the media, raise
the lever. It is the normal UP
position.
<Normal Pressure> (bottom)
When loading the media, lower
the lever. It is the normal DOWN
position.
<Weak> (In the middle)
The pressure force becomes
weak.
IP-5610取説_E.indb 26
09.4.3 3:14:10 PM
